Edge Equine Hand Floats

Edge Equine Hand Floats are specifically designed for the needs of the equine dental practitioner. Edge Equine Floats have a lower profile than standard floats and are available in a wide selection of sizes and angles to suit the needs of all sizes and breeds of horses. Edge Equine Hand Floats use a range of disposable blades that are easily interchanged.


Edge Equine Dental Float Starter Kit

Kit Contains

  • Edge Equine™ Dental Float, -6 Degree Head, 36 cm (14 in) Length 1 cm (3/8 in) Stainless Rod, S-Series 4 cm (1-1/2 in) Blade
  • Edge Equine™ Dental Float, +2 Degree Head, 52 cm (20-1/2 in) Length 1 cm (3/8 in) Stainless Rod, S-Series 5 cm (2 in) Blade
  • Edge Equine™ Dental Float, -4 Degree Head, 52 cm (20-1/2 in) Length 1 cm (3/8 in) Stainless Rod, S-Series 4 cm (1-1/2 in) Blade
  • The Edge Equine™ Dental Float, -4 Degree Head, 53 cm (21 in) Length 1 cm (3/8 in) Stainless Rod, Trigger Handle, S-Series 5 cm (2in) Blade
  • Roll up bag

Equine Hand Floats for No. 1 Upper & Lower Premolars

Edge Equine Dental Float 53229 Used for No. 1 Upper & Lower Premolars

-27 Degree Head , 33.6 cm Length, 1.27 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades


Edge Equine Dental Float 53230 Used for No. 1 Upper & Lower Premolars

-27 Degree Head , 35.6 cm Length, 1.27 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53209 Used for No. 1 Upper & Lower Premolars

-6 Degree Head , 35.6 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53218 Used for No. 1 Upper & Lower Premolars

s-6 Degree Head , 38.1 cm Length, 0.95 cm diameter stainless steel shaft, use S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53222 Used for No. 1 Upper & Lower Premolars

-6 Degree Head , 41.9 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Equine Hand Floats for No. 1, No. 2, No. 3 Upper & No. 1 Lower Premolars

Edge Equine Dental Float 53231 Used for No. 1, No. 2, No.3 Upper Premolars and No.1 Lower Premolars

-24 Degree Head , 38.1 cm Length, 1.58 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53232 Used for No. 1, No. 2, No.3 Upper Premolars and No.1 Lower Premolars

-24 Degree Head , 40.6 cm Length, 1.58 cm diameter stainless steel shaft, uses L series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53235 Used for No. 1, No. 2, No.3 Upper Premolars and No.1 Lower Premolars

-15 Degree Head , 43.1 cm Length, 1.27 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades


Edge Equine Dental Float 53219 Used for No. 1, No. 2, No.3 Upper Premolars and No.1 Lower Premolars

-24 Degree Head , 38.1 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 58225 Used for No. 1, No. 2, No.3 Upper Premolars and No.1 Lower Premolars

-18 Degree Head , 40.6 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Equine Hand Floats for Upper No. 6 Cheek Teeth Rear Molars

Edge Equine Dental Float 53240 Used for No. 6 Upper Cheek Rear Molars

s+4 Degree Head , 40.6 cm Length, 0.95 cm diameter stainless steel shaft, use E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53241 Used for No. 6 Upper Cheek Rear Molars

+4 Degree Head , 40.6 cm Length, 0.95 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Equine Hand Floats for Upper No. 3 to No. 6 (Triadan Nomenclature)

Edge Equine Dental Float 53236 Used for Upper No. 3 – No. 6 (Triadan Nomenclature)

+2 Degree Head , 52 cm Length, 0.95 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53238 Used for Upper No. 3 – No. 6 (Tridan Nomenclature)

s-2 Degree Head , 52 cm Length, 1.27 cm diameter stainless steel shaft, use E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53237 Used for Upper No. 3 – No. 6 (Tridan Nomenclature)

+2 Degree Head , 52 cm Length, 0.95 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53239 Used for Upper No. 3 – No. 6 (Tridan Nomenclature)

+2 Degree Head , 52 cm Length, 1.27 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53220 Used for Upper No. 3 – No. 6 (Tridan Nomenclature)

+2 Degree Head , 52 cm Length, 0.95 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Equine Hand Molar Roller Floats

Edge Equine Dental Float 53233 Molar Roller Float

36.8 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53234 Molar Roller Float

40.6 cm Length, 0.95 cm diameter stainless steel shaft, uses E series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Equine Hand Floats – Miscellaneous

Edge Equine Dental Float 53224 Trigger Handle

-2 Degree Head, 53.3 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53221

-4 Degree Head, 52 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Edge Equine Dental Float 53225 Trigger Handle

-4 Degree Head, 53.3 cm Length, 0.95 cm diameter stainless steel shaft, uses S series blades

  • Lighter in weight than traditional floats with blades
  • Lower in profile than traditional floats
  • Smaller blades for easier manoeuvrability than traditional floats
  • Blades available in a range of sizes, shapes and grades

Hand Float Blades